"The Bafang G60 is a rear geared hub motor that is designed for Fatbike installations with 170-175mm dropout lengths. This is the G60.500W model which is almost as powerful as the eZee hubs with plenty of torque for offroad riding. It uses a cassette freehub rather than a screw on freewheel for modern derailleur systems and has a disc mount as well. The hub shell includes an internal 6-pole speedeometer sensor so it can use a CA-DP device and not require an external speedo pickup. This motor is wound with a standard 8.2 RPM/V typically suited for 26" wheels.
Uses 9-pin overmolded Higo Z910 waterproof connector for the motor phase, hall, and speedometer wire that is compatible with our 20A Grinfineon controllers.
|Actual Weight (kg)||4.2|
|Country of Manufacture||China|
|Motor Power Range (Watts)||500-1000|
|Motor KV (RPM / V)||8.2|
|Phase Resistance (Ohm)||0.080|
|Disk Brake Compatible||Yes|
|Axle Length (O.L.D.)||175|
|Spoke Holes||36 Hole|
|Nominal Wheel Size||Unlaced|
|Flange Spoke Diameter (mm)||145|
|Magnetic Pole Pairs (Phaserunner)||50|
|Speedo Poles (for CA)||6|
|Hysteresis Losses (N-m)||0.58|
|Eddie Losses (N-m / rad/sec)||0.022|
|Motor Inductance (H)||
^Above information and pictures are provided by the distributor, Grin Technologies.