Baserunner Z9

Write a Review

Out of stock

"The Baserunner_Z9 is a compact field-oriented motor controller and enclosure that fits inside the Hailong and Reention downtube battery cradles. It is compatible with up to 14s (58V) battery packs and is terminated with a Z910 waterproof HiGo motor plug. Includes a throttle plug (with remote on/off switch wires under the heatshrink) and either , and either a classic 6-pin JST Cycle Analyst plug or the  8 pin HiGo plug for the new CA3-WP. 

The baserunner purchased on its own has bare + and - lead wires that will need to be soldered to the pins of the connector present in your original base plate. We do separately sell spare spade and bullet connector sets if desired. 

A computer setup is required to configure this controller to a given motor, and this requires the USB->TTL communications cable if you don't already have one. Users without an on-off switch on their battery should expect to wire in a separate switch on their own. Full Baserunner Information Page.

Manufacturer Grin
Country of Manufacture Canada
Dimensions (L x W x H, mm) 90 x 55 x 15
Actual Weight (kg) 0.18
Max Battery Amps (A) 30
Battery Range (V) 20-60
Low Voltage Cutoff (V) Programmable
MOSFETs 6x 8mOhm
Connector(s) JST-SM, TRRS, WP8 (HiGo 0812), Z910

Phaserunner Controller User Manual (Baserunner setup is similar)
New Phaserunner Software Suite from Grin Tech, Windows
New Phaserunner Software Suite from Grin Tech, Linux
New Phaserunner Software Suite from Grin Tech, MacOS"


^Above information and pictures are provided by the manufacturer, Grin Technologies.

Videos Hide Videos Show Videos